Interceptor Gauge Photos...

---

Interceptor Scan Gauge Details

The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector. A splitter cable is included with the dual Interceptor units. A function menu is available by pushing both buttons simultaneously. The first option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 45-60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.

Another menu option offers the ability to swap the foreground and backround colors of the display (to be shown soon in the IMAGES section of this site). Using this feature, for example, the gauge with a black backround and blue characters (negative image) becomes a blue backround with black characters (positive image). Not only can this be visually appealing but beneficial in changing lighting conditions. Positive images are easier to read in bright sunlight, negative at night.

• RPM
• MPH
• Intake Air Temperature
• Mass Air Flow Sensor Frequency
• Mass Air Flow Sensor (lb/min.)
• Engine Coolant Temperature
• Injector Pulse Width (bank 1 and 2 if supported)
• Long Term Fuel Trim (bank 1 and 2 if supported)
• Short Term Fuel Trim (bank 1 and 2 if supported)
• O2 Sensor Voltage (bank 1 and 2 if supported)
• Manifold Pressure in PSI (Boost pressure for factory
• turbo/supercharger applications)
• Ignition Advance
• Knock Retard
• Engine Run Time
• Battery Voltage
• Transmission Temperature
• Idle air Control Counts
• Throttle Position Percentage
• Throttle Position Voltage
• Engine Load
• Oil pressure (some 8 cylinder engines)
• Fuel economy (MPG)
• Horspepower
• Two user configurable analog inputs
  

CLICK HERE TO SEE DETAILED PHOTOS

---

PLX Devices

Description From the Manufacturer

DM-100
Intelligent Multi-Functional Display (iMFD)
Universal 2 1/16" (52mm) OLED Color Display for all Sensor Modules

• Real Time Plotting
• Customizable Gauge Styles, Backgrounds and Colors
• Digital Display
• Organic LED
• Set Peak and Hold Points
• Can Display Data from 4 Modules at Once
• Daisy Chain up to 32 Sensor Modules for One Display
• Simple to Install
• PC Interface Software Included for Analyzing Data
• Comes with Remote Control

---

One Gauge displays up to 32 sensors


Click here for details

       Contact Us:

                      Nelson Performance 210-626-0278
                      info at nelsonperformance.com